Full Project Before & After Drone Footage

The series of pictures below show the start to finish process involved in an installation of an in-ground vinyl liner pool, with a two tiered waterfall, and surrounding interlock and landscaping. This particular pool is 15 x 30 feet, with a 3'6" shallow end and 6'0" deep end. 

This is the before picture of the landscape, after the existing deck had been removed

After the initial excavation, the steel walls are installed.

Once all the walls are up, the pool is perfectly measured and concreted into place.

After the pool floor is layered with concrete, the landscape is backfilled with gravel.

Once the pool is secure, the waterfall can be built!

Next step; securing the coping around the pool's edge.

Columns are installed to support Gazebo

Interlock is laid on High Performance Bedding, insuring drainage away from the house and pool.

Gazebo and BBQ covering are completed

Polymeric Sand is used in paver joints. This eliminates 100% of all weeds and growth in cracks of interlock

The finished product!

The following gallery illustrates the start to finish process of a 16 x 34 foot vinyl liner pool with three sheer decent waterfalls built into a tiered rock wall.  Armour stone was used to finish the wall spanning the entire length of the backyard to retain the rear neighbour's higher elevation. The landscape was finished with interlock with a cobblestone border. 

Excavation

Steel walls being installed for a 16x34 rectangle

Ensuring the walls are 100% straight and level is our top priority

Pool coping experts

Water features. Landscape Design

Completed Water Feature with multi coloured lights

Ready to host family and friends!

This recent project was a 16 x 32 foot vinyl liner installation, featuring an armor stone retaining wall along the back of the property and 4 feet of interlocking surrounding the entirety of the pool. This installation also features full width steps into the shallow end.